- Katalog
- INSTALLATION DEVICES
- Isolators
- Isolator Ex9I125 2P 40A
Isolator Ex9I125 2P 40A
100869
8592765008701
Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.
Switching function | Off switch |
Number of normally open contacts | 2 |
Number of normally closed contacts | 0 |
Number of change-over contacts | 0 |
Number of poles | 2 |
Nominal rated current [A] | 40 |
Nominal rated voltage [V] | 400 |
Rated switching capacity [kA] | 1.26 |
Short-circuit breaking capacity (Icw) [kA] | 0.48 |
Voltage type | AC |
Forced segregation (according to DIN VDE 0113) | Tak |
With signal lamp | Nie |
Colour calotte | Grey |
Width in number of modular spacings | 2 |
Built-in depth [mm] | 80 |
Degree of protection (IP) | IP20 |
Power loss [W] | 4.2 |